Skip to main content

How to filter properties in a project

Filter, resize and choose the columns in your Landchecker project’s property table

Written by Airah Oquias

Use this article to filter the properties in a Landchecker project so you only see the ones you need. It also shows you how to combine several filters, widen a column to read long labels and choose which columns appear in the property table.

Filters change which properties are shown in your project’s property table under All properties. They don’t remove any properties from your project. Every property comes back as soon as you remove the filters.


Who can filter properties in a project

Filtering is available to Landchecker customers on a Standard, Advanced or Enterprise plan, because Projects is included in those plans.

How to filter properties in a project

You can filter the properties in a project from the Filters button above the property table.

To add a filter:

  1. Click your profile in the top right corner and select Projects.

  2. Open the project you want to filter.

  3. Under View on the left, make sure All properties is selected.

  4. Click Filters above the property table. The Active Filters panel opens.

  5. Click the Column dropdown and choose Property, Land Size, Zone or Labels.

  6. Click the Operator dropdown and choose how to match the value, like Greater than.

  7. Enter or choose a Value, like 300.

The property table updates straight away to show only the matching properties, and the Filters button shows how many filters are on, like Filters 1. To close the Active Filters panel, click anywhere outside it. Your filter stays on after the panel closes.

Note: A new filter starts with the Property column and the Contains operator selected. Change these to suit what you’re looking for.


Which filter options can I use?

The operator controls how a filter matches the value you enter. The table below shows the 4 columns you can filter by in a Landchecker project, and the operators and values available for each:

Column

What it filters

Operators

Value

Property

The property address

Contains, Equals, Is empty

Type part or all of an address

Zone

The planning zone

Contains, Equals, Is empty

Type part or all of a zone name

Land Size

The land area in square metres (m²)

Equal, Not equal, Greater than, Greater than or equal to, Less than, Less than or equal to

Type a number

Labels

The labels added to each property

Is any of

Choose one or more labels

Each operator works like this:

  • Contains: shows properties where the value includes the text you type. For example, “Sydney” matches “381 Sydney Road”.

  • Equals or Equal: shows properties where the value exactly matches what you enter.

  • Not equal: shows properties where the value doesn’t match what you enter.

  • Greater than and Less than: show properties above or below the number you enter.

  • Greater than or equal to and Less than or equal to: work the same way, but also include properties that exactly match the number.

  • Is empty: shows properties where the column has no value, like properties with no zone.

  • Is any of: shows properties that have at least one of the labels you choose.


How to use more than one filter

You can add several filters in a Landchecker project to narrow down your properties even further.

To add another filter:

  1. Click Filters above the property table.

  2. In the Active Filters panel, click Add Filter. A new filter row appears.

  3. Choose And or Or at the start of the new row:

    • And shows properties that match all of your filters.

    • Or shows properties that match at least one of your filters.

  4. Choose a Column, Operator and Value for the new filter.

The property table updates straight away, and the number on the Filters button goes up by one for each active filter. A filter icon also appears next to the name of each filtered column.

For example, filtering by Land Size greater than 300 And Labels is any of “Development opportunity” shows only properties over 300 m² that also have that label.


How to remove filters from a project

You can remove filters one at a time, or remove them all at once, to see every property in the project again.

To remove filters:

  1. Click Filters above the property table.

  2. Choose how to remove your filters:

    • To remove one filter, click the X at the start of its row.

    • To remove every filter, click Remove All.

The property table updates straight away. After you click Remove All, every property in the project shows again, and the Filters button no longer shows a number.

Note: Remove All only clears filters. It doesn’t clear sorting. To clear a sort, hover over the sorted column header, click the three-dot menu and select Unsort.


How to make a column wider

If text in the property table is cut off, like a long label shown as “Development…”, you can drag the edge of a column to make it wider.

To resize a column:

  1. Hover over the right edge of the column header you want to resize, like Labels. A divider line appears.

  2. Click and drag the edge to the right to make the column wider, or to the left to make it narrower.

  3. Release the mouse when the column is the width you want.

The column resizes straight away, and long labels or other text that was cut off now shows in full.

Note: Each column has a minimum width, so you can’t make a column narrower than its default size.


How to choose which columns to show

You can choose which columns appear in your project’s property table with the Columns button. The number next to Columns shows how many columns are visible out of the total, like 4/7.

To show or hide columns:

  1. Click Columns above the property table.

  2. Tick a column to show it, or untick a column to hide it. You can choose from:

    • Property

    • Land Size

    • Zone

    • Labels

    • Frontage

    • Orientation

    • Coordinates

  3. To show every column at once, tick Select all.

  4. Click anywhere outside the menu to close it.

The property table updates straight away to show the columns you’ve ticked.

Tip: You can also hide a single column from its header. Hover over the column header, click the three-dot menu and select Hide Column.


How to filter and sort from a column header

Each column header in a Landchecker project’s property table has a three-dot menu. You can use it to filter, sort, pin, hide and manage columns.

To open the column header menu:

  1. Hover over the column header you want to change, like Land Size.

  2. Click the three-dot menu that appears in the header.

  3. Select an option from the menu.

The column header menu has these options:

  • Sort by Ascending: sorts the column from lowest to highest, or A to Z.

  • Sort by Descending: sorts the column from highest to lowest, or Z to A.

  • Unsort: removes the sort and returns the table to its original order. This option only appears when the column is sorted.

  • Pin to Left: fixes the column to the left side of the table, so it stays in view when you scroll sideways.

  • Pin to Right: fixes the column to the right side of the table, so it stays in view when you scroll sideways.

  • Filter: opens the Active Filters panel, where you can add or change a filter.

  • Hide Column: hides the column from the property table.

  • Manage Column: opens the list of columns, where you can choose which columns to show.

The property table updates straight away after you choose an option.

Tip: You can also sort a column by clicking the arrow next to its name in the header.


Frequently asked questions

How do I filter properties in a Landchecker project?

To filter properties in a project, click Filters above the property table, then choose a Column, an Operator and a Value. The property table updates straight away to show only the matching properties.

Which columns can I filter by in a project?

You can filter properties in a project by Property (address), Land Size, Zone and Labels.

Can I use more than one filter at a time?

You can use more than one filter at a time in a project. Click Add Filter in the Active Filters panel, then choose And to match all filters or Or to match any filter.

Why are some properties missing from my project?

Some properties may be hidden because a filter is on. Check whether the Filters button shows a number. If it does, open Filters and click Remove All to show every property again.

Do filters delete properties from my project?

Filters don’t delete any properties from your project. Filters only change which properties are shown in the property table, and every property comes back when you remove the filters.

How do I see a label that’s cut off in the property table?

To see a label that’s cut off, hover over the right edge of the Labels column header and drag it to the right. The column gets wider and the full label name shows.

How do I show or hide columns in the property table?

To show or hide columns, click Columns above the property table, then tick the columns you want to see and untick the ones you don’t.

Does Remove All also clear sorting?

Remove All doesn’t clear sorting in a project. To clear a sort, hover over the sorted column header, click the three-dot menu and select Unsort.

Did this answer your question?