Skip to main content

How to measure length using the Distance tool

Measure property length or land boundaries using the Distance tool on Landchecker.

Written by Airah Oquias

You can measure the length of a property boundary, land parcel or any object on the map using the Distance tool on the right-hand side toolbar. Use this article to draw a straight line or a line with several segments, snap points to property boundary corners, change a line after you've drawn it, place a point at an exact distance along a line and choose how the length shows on the map.

Plan access: The Distance tool is available on the Standard, Advanced and Enterprise plans. Free plan members don't have access to the drawing tools. To see what's included on each plan, compare Landchecker plans.


What is the Distance tool?

The Distance tool is the Landchecker drawing tool that measures length. You click points on the map, the Distance tool draws a line between them and the length shows on the line.

Use the Distance tool to measure:

  • a property's frontage, side boundary or rear boundary

  • a setback, such as the distance from a boundary to a building or a tree

  • the distance between two points, such as a driveway and a street corner

  • a route with bends, such as a fence line or a path

The Distance tool sits in the toolbar on the right-hand side of the map, with the other drawing tools. Every line you draw with the Distance tool is listed in the Tools panel and saved to the cloud automatically, so it's still there the next time you log in.

To measure the area or perimeter of a site instead, use the Any Shape, Rectangle or Circle tool. See How to measure area and perimeter.


How do I measure length using the Distance tool?

Follow these steps to measure a straight line with the Distance tool:

  1. Search for a property using the address search bar.

  2. Click the Distance Tool icon in the toolbar on the right-hand side of the map. Draw Mode appears at the top centre of the map.

  3. Click the map where you want the measurement to start.

  4. Move your cursor to where you want the measurement to end. The length updates as you move.

  5. Double-click to place the end point and finish the line.

When you finish, the length stays on the line and the action bar opens at the bottom centre of the map. Landchecker names the line for you, such as Line 1, and saves it automatically.
​
The Distance tool switches off after each line you finish. To measure something else, click the Distance Tool icon again.

Tip: zoom in close before you click. The closer you zoom, the more precisely you can place each point.
​
​Good to know: to cancel a line while you're still drawing it, press Esc on your keyboard. The line is removed.


How do I measure a line with more than one segment?

The Distance tool can measure a line with bends, such as a fence line, a driveway or an irregular boundary, as well as a straight line.

  1. Click the Distance Tool icon in the toolbar on the right-hand side of the map.

  2. Click the map where you want the measurement to start.

  3. Click once at each bend. Each click adds a new segment, and a hint beside your cursor reads "Click to add, dbl-click to finish".

  4. Double-click the last point to finish the line.

Each segment shows its own length along the line, and the Total label at the end shows the full length of the Distance tool line, from the first point to the last.


How do I snap a distance measurement to a property boundary?

Snapping makes the Distance tool place each point exactly on a property boundary, so a frontage or boundary measurement starts and ends on the parcel rather than close to it.

With snapping on, each point jumps to the nearest boundary corner when your cursor is close to one, or onto the boundary line itself when there's no corner nearby.

  1. Click the Distance Tool icon in the toolbar on the right-hand side of the map.

  2. In Draw Mode at the top centre of the map, click the magnet icon. When you hover over it, it reads Turn on snapping. The magnet turns orange to show snapping is on.

  3. Move your cursor close to the boundary corner where you want the measurement to start, then click. The point snaps onto the boundary.

  4. Click each corner along the boundary, then double-click the last corner to finish the line.

  5. To place points freely again, click the magnet icon a second time to turn snapping off.

You can also press G on your keyboard to turn snapping on or off while you draw. To learn more, read How to use snapping to draw to property boundaries.

Good to know: snapping uses the property boundaries shown on the map. If you can't see boundaries, for example on High Resolution Aerial Imagery, click the Map Layers icon in the left-hand menu, click Base Map and tick Properties.


How can the Distance tool help with my work?

Distance tool measurements give you an early read on a site’s dimensions from your desk, before you visit the site or order a survey. Here’s how different professionals use the Distance tool, and what to use alongside it.

Property developers

Check a frontage against a minimum frontage control, measure the width of an access handle on a battle-axe lot or test setbacks before a feasibility.

Use the Distance tool with:

  • Snapping – start and finish each measurement on the property boundary.

  • Placing a point at an exact distance – mark a setback at the distance your planning controls require.

  • Projects – save your measurements with the site, so your team works from the same figures.

Architects and building designers

Measure setbacks, separation distances and driveway lengths over a site before you start a design.

Use the Distance tool with:

  • Contours under Heritage & Environment in Map Layers – measure across the block between contour lines to see how quickly the land falls.

  • High Resolution Aerial Imagery – measure existing buildings, trees and driveways.

  • CAD exports – download the site’s boundaries with edge dimensions as a DWG or DXF file to open in your CAD software, on the Advanced and Enterprise plans. See How to export CAD files.

Town planners

Check separation distances and setbacks against planning controls, and measure how far a site is from a zone or use that affects it.

Use the Distance tool with:

  • Planning Zones and Planning Overlays under Planning in Map Layers – measure from a site to a zone or overlay boundary.

  • Planning Permits – measure the distance to nearby approved developments.

Valuers

Record frontage and depth, and measure the distance from a property to things that affect value, such as a main road or a rail line.

Use the Distance tool with:

  • Property boundary dimensions – read each boundary length, then measure anything that isn’t a whole boundary with the Distance tool.

  • Comparable Sales – find nearby sales, then measure their frontages with the Distance tool to compare like with like.

Real estate agents

Measure a property’s frontage and the distance to a park, school or train station for an appraisal or a listing.

Use the Distance tool with:

  • Points of Interest – show nearby amenities on the map, then draw the route to them with the Distance tool.

  • Export Current Map View – add a measured map image to an appraisal or buyer pack.

Conveyancers and lawyers

Get an early visual check of where an easement or a fence sits against the boundary before you read the title documents.

Use the Distance tool with:

  • Easements under Planning in Map Layers – measure where an easement sits on the property.

  • Document Searches – order the title and plan to confirm the exact dimensions.


What should I know before relying on Distance tool measurements?

Keep these limitations in mind when you measure with the Distance tool:

  • Measurements are indicative. Use Distance tool measurements for early site assessment, not in place of a survey. For exact dimensions, check the title plan or engage a licensed surveyor.

  • Lengths are shown to one decimal place, such as 20.3 m.

  • Accuracy depends on where you place each point. Zoom in close, and turn on snapping when you’re measuring along property boundaries.

  • Aerial imagery and property boundaries come from different sources. They may not line up exactly, so a length measured from a fence or building on aerial imagery can differ from the boundary dimensions.

  • Snapping needs property boundaries on the map. If no boundaries are showing, snapping has nothing to snap to.

  • The exact-distance label measures in a straight line from the selected point, not around bends.

  • One distance unit applies to every line. Changing the unit in Settings changes it for every line and shape on the map.

  • Delete is immediate. Selecting Delete removes the line straight away. To take a line off the map without deleting it, select Hide instead.

  • The Distance tool isn’t on the Starter Free plan. Free plan members don’t have access to the drawing tools.


Frequently asked questions

Where is the Distance tool in Landchecker?

The Distance tool is in the toolbar on the right-hand side of the map, with the other drawing tools. Hover over the icons to find Distance Tool. Every line you draw is also listed in the Tools panel, which you open from the Tools icon in the left-hand menu.

Which Landchecker plans include the Distance tool?

The Distance tool is available on the Standard, Advanced and Enterprise plans. Free plan members don’t have access to the drawing tools. To compare plans or upgrade, see Landchecker plans and pricing.

How do I cancel a Distance tool line I’m drawing?

Press Esc on your keyboard while you’re drawing. The line you’re drawing is removed.

Are my Distance tool measurements saved?

Yes. Distance tool lines are saved to the cloud automatically and listed in the Tools panel, so they’re still there the next time you log in. To keep a measurement with a site and share it with your team, save it to a project.

Can I measure area with the Distance tool?

No. The Distance tool measures length only. To measure area and perimeter, use the Any Shape, Rectangle or Circle tool. See How to measure area and perimeter.

Is the Distance tool the same as Distance-To in Proximity Analysis?

No. The Distance tool is a drawing tool that measures any length you draw on the map. Distance-To is part of Proximity Analysis, which filters Places of Interest by how far they are from a site. Proximity Analysis is available on the Advanced and Enterprise plans.

If you have questions or need help, use the live chat in Landchecker and our team will be happy to assist.

Did this answer your question?