Use this article to set up a planning permit/DA alert in Landchecker, check your saved alerts, edit an alert and delete alerts you no longer need. A planning permit/DA alert (DA stands for development application) sends you an email when a new planning permit or development application that matches your criteria is lodged in an area you're watching. You can watch a whole suburb or a set distance around a property.
Plan access: Planning permit/DA alerts are available on the Standard, Advanced and Enterprise plans. Standard members can set up 10 alerts each. Advanced and Enterprise members can set up unlimited alerts. Planning permit/DA alerts aren't included in the free Starter plan. View our plans here.
Where do I find planning permit/DA alerts in Landchecker?
You'll find planning permit/DA alerts in the Planning Permits/DAs panel on the Landchecker map. To open the alert settings:
Log in to Landchecker and go to the map.
In the toolbar on the left of the map, click the Planning Permits/DAs icon (the clipboard icon). The Planning Permits/DAs panel opens on the left.
Click Alerts to expand the alert settings. The Setup tab opens by default.
Hover over the warning icon next to Alert instructions to see the coverage note. Before you set up an alert, check that planning permit/DA data is available for your area by turning on the Planning Permits/DAs layer and looking for permits on the map.
How do I set up a planning permit/DA alert?
You set up a planning permit/DA alert from the Setup tab in the Alerts section of the Planning Permits/DAs panel. Each alert needs an area and a frequency. You can also add a keyword to narrow the alert.
In the Planning Permits/DAs panel, click Alerts, then click the Setup tab.
In the Area field, type an address, lot or suburb, then select it from the dropdown list.
If you selected an address or lot, drag the Buffer Distance (m) slider to set how far from the property Landchecker should watch for new permits. You can set any distance from 0 to 1,000 metres. The buffer appears as a dashed orange circle on the map.
(Optional) In the Keyword field, enter a word to receive alerts only for a specific type of development, for example "apartment" or "subdivision".
Under Frequency, select Daily or Weekly.
Click Create.
A green message appears at the bottom of the screen that says "Your permit alert has been created." Landchecker then opens the My Alerts tab, where your new planning permit/DA alert appears at the top of the list.
If you want to start again before you click Create, click Clear to reset the form.
What area can a planning permit/DA alert cover?
The area you choose in the Area field decides what a planning permit/DA alert watches. The table below shows the two area types you can use when you set up a planning permit/DA alert in Landchecker.
Area type | What the alert watches | Buffer distance |
Suburb | New planning permits and DAs lodged anywhere in the suburb | Not used |
Address or lot | New planning permits and DAs lodged within the buffer around the property | 0 to 1,000 metres |
How do keywords work in planning permit/DA alerts?
A keyword filters a planning permit/DA alert so you only hear about the types of development you care about.
For example, to track apartment construction near a property, you could set the area to 49–51 Stead Street, South Melbourne Vic 3205, the buffer to 300 metres and the keyword to "multi-storey".
If you enter two keywords, Landchecker only sends alerts for permits that contain both keywords. To track two different types of development, set up a separate alert for each keyword.
What happens after I create a planning permit/DA alert?
After you click Create, Landchecker saves your planning permit/DA alert, shows the message "Your permit alert has been created." and opens the My Alerts tab. The My Alerts tab lists every planning permit/DA alert on your account. Each alert shows:
The area (a house icon means an address or lot, a layers icon means a suburb)
Alert interval: Daily or Weekly
Distance: the buffer distance in metres (address and lot alerts only)
Keywords: the keyword you entered, if any
When will I receive planning permit/DA alert emails?
Landchecker sends planning permit/DA alert emails based on the frequency you choose:
Daily: You receive an email on any day that new planning permits or DAs matching your alert are lodged.
Weekly: You receive one summary email every Monday covering new planning permits or DAs lodged that week.
You only receive a planning permit/DA alert email when a new permit or DA matching your area and keyword is lodged. If nothing new is lodged, no email is sent.
How do I edit a planning permit/DA alert?
You can change the area, buffer distance, keyword or frequency of an existing planning permit/DA alert from the My Alerts tab.
In the Planning Permits/DAs panel, click Alerts, then click the My Alerts tab.
Find the alert you want to change and click the three-dot menu (⋮) next to it.
Click Edit. The Setup tab opens with the alert's current settings.
Change the Area, Buffer Distance (m), Keyword or Frequency.
Click Update.
A green message appears that says "Your permit alert has been updated." Landchecker returns you to the My Alerts tab, where the alert shows its new settings.
How do I delete a planning permit/DA alert?
Deleting a planning permit/DA alert stops all emails for that alert. You can delete an alert from the My Alerts tab.
In the Planning Permits/DAs panel, click Alerts, then click the My Alerts tab.
Find the alert you want to remove and click the three-dot menu (⋮) next to it.
Click Delete. A Delete Permit/DA Alert? window opens and asks you to confirm.
Click Delete to remove the alert, or click Cancel to keep it.
A green message appears that says "Your permit alert has been deleted." and the alert is removed from the My Alerts list. A deleted planning permit/DA alert can't be restored, so to receive those alerts again you'll need to set the alert up again.
Planning permit/DA alert limits
Planning permit/DA alerts in Landchecker have the following limits:
Number of alerts: Standard members can set up 10 alerts each. Advanced and Enterprise members can set up unlimited alerts.
Buffer distance: The maximum buffer distance around an address or lot is 1,000 metres. Suburb alerts cover the whole suburb and don't use a buffer.
Frequency: Alerts are sent daily or weekly. Weekly alerts are sent every Monday.
Keywords: If you enter two keywords in one alert, you only receive alerts for permits that contain both keywords.
Coverage: Planning permit/DA data isn't available for every council yet. Check coverage for your area on the Planning Permits/DAs layer before you set up an alert. If your area isn't covered, contact our team via live chat.
Why am I not receiving planning permit/DA alert emails?
If you've set up a planning permit/DA alert but haven't received any emails, check the following:
No new matching permits: Landchecker only sends an email when a new planning permit or DA matching your alert is lodged.
Keyword is too narrow: A specific keyword, or two keywords together, can filter out most permits. Try a broader keyword or remove the keyword.
Weekly timing: Weekly planning permit/DA alerts are sent on Mondays only.
Coverage: Check that planning permit/DA data is available for your area on the Planning Permits/DAs layer.
Email filters: Check your spam or junk folder, and add Landchecker to your safe senders list.
Frequently asked questions
Can I set up a planning permit/DA alert for a whole suburb?
Yes, you can set up a planning permit/DA alert for a whole suburb. Type the suburb name in the Area field and select it from the dropdown list. Suburb alerts cover the entire suburb, so there's no buffer distance to set.
How many planning permit/DA alerts can I set up?
The number of planning permit/DA alerts you can set up depends on your plan. Standard members can set up 10 alerts each. Advanced and Enterprise members can set up unlimited alerts. Planning permit/DA alerts aren't included in the free Starter plan.
What is the maximum buffer distance for a planning permit/DA alert?
The maximum buffer distance for a planning permit/DA alert is 1,000 metres around the address or lot you select. You set the buffer with the Buffer Distance (m) slider in the Setup tab.
What day do weekly planning permit/DA alerts arrive?
Weekly planning permit/DA alerts arrive every Monday. Each weekly email summarises new planning permits and DAs matching your alert.
Can I use more than one keyword in a planning permit/DA alert?
You can enter more than one keyword in a planning permit/DA alert, but Landchecker only sends alerts for permits that contain all the keywords you enter. To track different types of development separately, set up one alert per keyword.
Can I change a planning permit/DA alert after I create it?
Yes, you can change a planning permit/DA alert at any time. Go to the My Alerts tab, click the three-dot menu (⋮) next to the alert, click Edit, make your changes and click Update.
Need help with planning permit/DA alerts?
If you have questions about planning permit/DA alerts or coverage in your area, chat with our team via live chat in Landchecker. We're happy to help.





